Product Category

India's Trusted Water Softening Plant Manufacturer

Minerals in water can damage your system over time, causing scaling, higher energy use, and breakdowns.

Choosing the right water softening plant manufacturer is a smart investment, not just a purchase.

Unitech Water Solution delivers high-performance water softener systems engineered in Ahmedabad, designed for reliability, low maintenance, and precise capacity matching. Our solutions help industries and commercial facilities reduce costs, protect equipment, and ensure smooth operations from day one.

Request A Quote
Product Description

Softening is a process where Calcium and Magnesium ions are exchanged for Sodium ions. Calcium and Magnesium ions associated with Alkalinity contribute for scale formation. These ions are also called as Total hardness. The strong acid Cation exchange resin in Sodium form is used for softening the water. When the resin is exhausted, it is regenerated with brine solution (Sodium Chloride) 10 % or 15% brine solution is normally used for the regeneration. If the brine solution is passed from the bottom of the resin and service flow is from the top, then it is called as Up flow softener. If the service and regeneration flows are from top to bottom, then it is called as down flow softeners. The softeners are run up to the Hardness slip of 5 ppm as CaCO3 in the treated water, which is called as Industrial Zero hardness.

How Does a Water Softener Work?

The idea behind a water softener is simple. The calcium and magnesium ions in the water are replaced with sodium ions. Since sodium does not precipitate out in pipes or react badly with soap, both of the problems of hard water are eliminated. To do the ion replacement, the water in the house runs through a bed of ion exchange resin. The resins are covered with sodium ions. As the water flows past the sodium ions, they swap places with the calcium and magnesium ions. Eventually, the resin contains nothing but calcium and magnesium and no sodium, and at this point they stop softening the water. It is then time to regenerate the ion exchange resin. Regeneration involves soaking the resin in a stream of sodium ions. Salt is sodium chloride, so the water softener mixes up a very strong brine solution and flushes it through the resin bed. The strong brine displaces all of the calcium and magnesium that has built up in the resin and replaces it again with sodium. The remaining brine plus all of the calcium and magnesium is flushed out through a drainpipe

Advantages of Soft Water
  • Having soft water saves you money. When your water is soft, you use much less soap and fewer cleaning products. You can save money on washing powder, Fabric conditioner, Hand cream, Bath salts and oils, Hair shampoo, Hair conditioner, Soap, Washing up liquid, Dishwashing liquid, cleaning materials, and Dishwashing powder.
  • Your plumbing will last longer. Hard water can cause a build up of scale from mineral deposits. Over time, pipes can clog, water flow can diminish, and water pressure can be reduced. This doesn't happen with soft water. Soft water is low in mineral content and therefore doesn't leave deposits in the pipes.
  • Your hot water heater will last longer. Scale and lime build-up created by minerals will not take place if your water is soft. This adds life to your hot water heater. Also, if you don't have deposits in your hot water heater, it will cost approximately 20% less to heat the water that your family does use. At the end of a year, these savings can really add up.
  • Most water-using appliances will last longer. Whether it's your coffee pot, your humidifier, or your hot tub, soft water inhibits a build-up of minerals and adds life to these products.

Improve Equipment Performance with a Water Softener

A high-quality water softener plant doesn’t just remove hardness — it protects everything downstream. From day one, it works to extend the life and performance of your critical assets.

Boilers operate cleaner with better efficiency. RO systems perform longer with fewer interruptions. Heat exchangers transfer energy without scale buildup, and cooling systems stay stable without excessive chemical use.

Facilities using an industrial water softener before their Industrial RO Plant consistently see lower membrane fouling and reduced chemical consumption. The result? Lower operating costs, fewer breakdowns, and longer equipment life.

A well-designed softening system isn’t just water treatment — it’s long-term protection for your entire investment.

Built for Non-Stop Performance: Precision-Engineered Features

Every industrial water softener system from Unitech Water Solution is designed with one clear goal — continuous, reliable soft water output. No interruptions. No guesswork. Just consistent performance.

Here’s what you get in every system:

  • Outlet Hardness Below 5 ppm (Guaranteed)
    Every plant is tested and commissioned to deliver near-zero hardness. Not assumed — verified.
  • Smart Auto-Regeneration Control
    Meter-based systems regenerate only when required. This saves salt, reduces water use, and increases resin life.
  • Duplex & Triplex Configurations
    No downtime setups ensure one tank runs while another regenerates — ideal for 24/7 operations.
  • High-Flow Multiport Valve Systems
    Smooth operation across service, backwash, and rinse cycles — fully automatic, no manual handling.
  • Skid-Mounted, Pre-Tested Units
    Fully assembled and tested at our Vatva GIDC facility before dispatch for quick installation.
  • Wide Inlet Hardness Handling
    Designed for real-world water conditions — from 150 ppm to 1,200+ ppm, including borewell and mixed sources.

One Softening Solution for Every Industry Across India

As a trusted water softener plant supplier, we serve industries where water quality directly impacts performance, cost, and compliance.

  • Power & Heavy Industry
    Prevent scale buildup, heat loss, and equipment failure in boilers. Many clients integrate our Filtration System for complete pre-treatment.
  • Pharmaceutical & Biotech
    Reliable upstream softening ensures smooth ultrafiltration and RO operations for compliant process water.
  • Commercial Real Estate & Smart Cities
    Builders and facility managers across Gujarat rely on our systems to protect HVAC, pipelines, and shared infrastructure.
  • Healthcare & Institutions
    Hospitals and campuses need scale-free water for sterilisation and utilities. Many also install a Sewage Treatment Plant for full water management.

Why Choosing the Right Manufacturer Makes All the Difference

Not every supplier builds what they sell. Unitech Water Solution is a 100% in-house water softening plant manufacturer — every vessel, valve, and control panel is built at our Vatva GIDC facility in Ahmedabad. No outsourcing. No rebranding.

  • ISO 9001:2015 Certified Manufacturing
  • BIS & CE Compliant Systems
  • Proven Exports to Gulf, Africa & Middle East

As a reliable water softener plant supplier, we don’t stop at delivery. We provide complete after-sales support — maintenance, resin checks, spare parts, and fast technical assistance. You always deal with a dedicated expert, not a call centre.

Explore our full range of Water Treatment Plants to see how softening fits into your complete solution.

FAQs


A water softening plant manufacturer designs, builds, and supplies complete systems — including vessels, resin, valves, and control panels. Unlike traders, Unitech builds everything in-house for better quality control, faster delivery, and direct support.

Look for in-house production, ISO 9001:2015 certification, export experience, and strong after-sales support. A reliable manufacturer always designs systems based on your actual water test report.

Our systems are designed to deliver outlet hardness below 5 ppm as CaCO3. Each unit is tested before dispatch to ensure performance.

Yes. Our systems are built for inlet hardness from 150 ppm to 1,200+ ppm. We customise resin and vessel size based on your water quality and usage.

Yes. We offer single, duplex, and triplex systems. Duplex setups ensure continuous supply — one tank operates while the other regenerates automatically.